Skoda FABIA III COMBI Rear parking sensors

Theme : Skoda FABIA III COMBI Rear parking sensors 

item: 6V9054630B

The parking sensors are the simple solution for correctly reversing. They reduce the risk of colliding with people or objects that are out of the driver‘s line of sight (low walls, railings, or even small children). The sensors are fitted recessed into the rear bumper so that they do not spoil the vehicle‘s aesthetics. Using ultrasonic waves, the sensors calculate the distance between the vehicle and the potential obstruction. An acoustic signal through the speaker or an indicator on the infotainment screen keeps the driver informed about how much space there is behind the vehicle. Whilst the parking sensors are the perfect assistant when it comes to reversing or manoeuvring, the driver is, however, in no way absolved of responsibility for having the vehicle under control at all times. Before reversing, the driver must make sure that there are no small obstacles behind the vehicle (e.g. rocks, narrow pillars, trailer tow bars, etc.). This type of obstacle may lie outside of the area that is monitored. When washing the car with pressurised water, never direct the pressure washer nozzle at the sensors fitted in the rear bumper. A description of how the rear parking sensors work, detailed information on how to use them and a visual representation of the area monitored can be found in the Owner‘s Manual – see the „Parking aid“ section in the „Assist systems“ chapter.

Content of set

wiring harness for the sensor connection on the rear bumper, wiring harness for the rear parking sensors for the vehicle interior, control unit, speaker, sensor (3x) and spacer for the sensor (3x), left-hand side/right-hand side/center parking sensor brackets (3x), 2-pin protection connector (small and large), connecting materials (expanding rivet, hook and loop fastener, self-adhesive foam-rubber tape, clip, cable tie), fitting instructions

Restrictions 

Only for left-hand drive FABIA COMBI vehicles manufactured from CW 31/2018. This component is not compatible with the electronic system in vehicles manufactured in Russia (Kaluga, Nizhny Novgorod).

Placement In the rear bumper.

NOTICE

The following items must be ordered from the  ŠKODA Original Accessories range: Die (drill) / BEA 000 001 The following is also required in accordance with the workshop‘s practices: 3M 4298 UV activator / HHA 381 017

Fit: Skoda Fabia III Combi ( 2018 - )